Editor's Note:
The following is an abridged version ofChrissy Stewart'sand Cheryl Robert's Composition of a Paint Coating article featured in一个SM Handbook, Volume 5B: Protective Organic Coatings. This handbook is comprised of 480 pages and divided into five sections, which offer introductory material, an in-depth presentation of specificcoating materials, practical information onsurface preparation和涂层的应用,覆盖涂层使用by various industries, and a detailed discussion of coating analysis and evaluation methods. Volume 5B authors provided the latest information on the many industry standards that must be adhered to in the preparation, application and testing of protective coatings.
完整的战争h article along with the rest of the authoritative, reliable sources of information, visit the webpagehere.
***
The terms "paints" and "coatings"are often used interchangeably. However, for the most part, paints are considered to be used primarily for aesthetics, while coatings are used principally to prevent substratedeteriorationor forcorrosion protection.Industrial coatingsare most commonly used for the protection of corrosion of a metal substrate in structures such as bridges, pipelines or exterior metal tank surfaces.
Regardless of the use, a layer of paint or coating will protect the surface and will also provide color, gloss and other estate properties. In this article, the word "coatings"is used, although substituting the word "paints" for "coatings"isnot不正确的。一个coatingcan be defined as a substance spread over a surface to provide protection or to serve decorative purposes. This overview focuses on paint coatings—particularly industrial coatings, which are designed for protective properties rather than for aesthetic qualities.
一个coating can be divided into two major components:pigmentationand vehicle. The pigmentation typically consists of colorants,corrosion inhibitorsandextenders, although other insoluble raw materials may also be included. The vehicle carries the pigmentation to the surface and binds it into the coating film. The vehicle typically consists of the resin orbinder,solventsand any additives that may be included in the formulation.
Pigments
In many industries, including the plastics industry, the term "pigment" is used to identify a substance that is a colorant. In the coatings industry, the definition is much broader. While it is true that pigments often improve the appearance of coatings, they also serve many other functions in coatings. For example, some pigments improve the physical properties of the film, such as its strength,permeabilityto moisture and impact resistance, whereas other pigments protect the substrate from corrosion, fire or mold. (The use of coatings for corrosion prevention is discussed in一个nti-Corrosion Coatings for Different Service Exposures.)
No matter what their function is, most pigments used in the coatings industry are finely divided solids that are insoluble in the other coating ingredients. Thus, most pigments do not dissolve in the resin or the solvent and instead are suspended in them. Coatings typically do use not a single pigment but rather a blend of pigments to achieve the balance of aesthetic, physical and protective properties.
Resin
Theresinsystem cohesively binds the pigmentation and other components together and adhesively binds the coating to the underlying substrate or coating layer. This is what allows the coating to form a solid/hard to semi-hard (depending on the resin) plastic-like film. The choice of resin system has a substantial impact on the performance of a coating. This is the reason that a coating often is identified generically by the type of resin it contains.
The resin component of a coating is apolymer, which is formed by the covalent bonding of many smaller molecules, linking them together into a chain. The components of the chain, which are calledmonomers, may be all the same chemical or a mix of chemicals. The composition of a polymer is chosen so that the resin has the properties desired.
一个dditives
Various types of additives are used to improve the consistency, flowout, surface wetting, color,ultraviolet light (e.g. sunlight) resistanceand flexibility, and to prevent settling in the can (suspending agents). For example,polyurethane coatingsare formulated with hindered-aminelight stabilizersto help preserve gloss and color on exposure to sunlight, andplasticizersare formulated into hard or brittle coatings, such asvinyls, to provide film flexibility.
Solvent
The solvent is the volatile component of the vehicle and may include water or organic liquids such asmethyl ethyl ketoneormineral spirits. Although the solvent is part of the wet film during application, it is not intended to be part of the dry film once the coating dries orcures. It is uncommon for a coating to be formulated with one type of solvent; typically, a blend of solvents is used, with each type of solvent in the blend performing a different function.
Primary solvents are the solvents that are formulated into the coating to reduce theviscosityof the resin, pigment and additives so that the coating can be properlyatomizedthrough aspray gunor applied with brush or roller. Secondary solvents are slower-evaporating solvents, remaining in the wet coating film a little longer than the primary solvents. They help the coating to flow out to form a uniform, continuous film.
Volatile Organic Compounds
一个problem with many of the organic solvents used in coating formulations, or added as thinners in the field, is that after evaporating from the coating film into the air, they can react withnitrogen oxidesand carbon monoxide in the presence of sunlight to produce ozone, a component of smog. These are also known asvolatile organic compounds (VOCs).
涂料的挥发性有机化合物含量通常表达语言d in pounds per gallon or grams per liter and is reported on the coating manufacturer’sproduct data sheet. Many manufacturers also report the VOC content after addition of thinner. When a structure is being painted in the field, the VOC limit is typically dictated by the project specification or the local air pollution agency.
Film-Forming Mechanisms of Various Coating Types
一个lthough the list of curing mechanisms below is not inclusive of all coating material curing mechanisms, these are the ones most applicable to industrial coatings:
Lacquers
Thermoplastic resinsused in coatings includepolyvinyl chloride,polystyrene,poly(methyl methacrylate)and polystyrene-butadiene copolymer. They are generally one-pack systems (all components of the coating are packaged in one container) that are fast-drying and low solids. A coating containing a thermoplastic binder dissolved in organic solvent is called a lacquer. Once a lacquer is applied, the thermoplastic film hardens as the solvent evaporates. The polymer chains may entangle, but no chemical reaction occurs as the film is formed.
Chemically Converting Coating
Lacquers are not used as often today because of regulations restricting the use of VOCs. The binder of lacquers is dissolved in organic solvents, and many of the solvents used are considered VOCs. Instead,two-pack systems(in which coating components are packaged into containers to be mixed together at the time of application) ofchemically converting coatingswith high solids content are used. Each pack contains a solution of small polymers.
When the packs are mixed together at ambient temperatures, the small polymers begin to combine to form polymers of high molecular weight. When the mixed coating is applied, the molecules still have not reacted to a point that theviscosityis excessive, even though the solids content of the mixture is high. Because the components contain a high percentage of solids, the percentage of solvent they contain is low; thus, the VOC content is low.
Latex Coatings
Inlatex coatings, polymers of very high molecular weight exist in discrete particles calledmicellessuspended in water. To prepare a latex polymer, a small quantity ofanionicsurfactantis added to a much larger quantity of water. The anionic surfactant molecules associate in roughly spherical particles, with the negatively charged heads on the outside and the nonpolar tails on the inside. When monomer is added to the mixture, it diffuses into the particle. The repulsive force provided by the anionic surfactants on the surface of the particles keeps the particles from coagulating.
一个lkyds and Other Resins that Cure by Oxidation
The film-formation mechanism ofalkydsand other coatings that contain drying oils is initiated by oxygen in the air. After the film is applied, the alkyd molecules in the resin cross link through a chemical reaction involving the unsaturated (double) bonds of the oil and oxygen.Drying oils, such as linseed oil and fish oil, typically contain a fatty acid with three or more sets of double bonds.
一个lkyds are essentially polyesters reacted or modified with drying oils. Other resins that are sometimes modified with drying oils include epoxy esters,urethanesandphenolic. The properties of the coating are highly dependent on the type and amount of the oil modification. The curing process never stops as long as the coating is exposed to oxygen. As a result, many alkyd systems become brittle over time. (Learn more about alkyd resins in the article一个n Overview of Alkyd Resins.)
Moisture-Curing Polyurethanes and Inorganic Zinc Primers
Only a few industrial coatings requiremoisture to cure. These include moisture-curing polyurethanes and ethyl-silicate-typeinorganic zinc-rich primers. The curing reaction in each of these systems involveshydrolysis, or the cleavage of chemical bonds with water. As a result of the hydrolysis reaction, moisture-curing urethanes release carbon dioxide (CO2), andinorganic zinc-rich primersreleaseethyl alcohol.
Powder Coatings
Powder coatingscan contain either thermoplastic or thermoset resins. The powder can be applied byelectrostatic sprayor by passing the preheated pieces through a fluidized bed of the powder suspended in air. After the powder is applied, the coated pieces are baked. If the resin is a thermoplastic, the particles melt together to form a film. If the resin is a thermoset, the particles chemically react to form cross links. Resins commonly applied as powder coatings include vinyls, epoxies and polyesters. (For more about powder coatings seeThe 5 Advantages of Powder Coatings.)
Coating Systems Defined
Coatings can, in many cases, be combined to create acoating system. A coating system includes both the surface preparation and the application of one or more coating layers. If multiple coats of the same product are specified, contrasting colors are sometimes employed to assist the applicator in ensuring coverage.
Coating systems usually consist of aprimerand atop coat. In many instances, an intermediate coat is also specified. When multiple coatings are used to create a system, they must be compatible with one another. Also, each coating layer has a function that is performed at a given thickness. Accordingly, one cannot make up for an inadequate zinc-rich primer thickness by adding extra thickness to an epoxy intermediate coat. Each layer should be applied at the optimum thickness (neither too thick nor too thin) and verified for proper thickness prior to the application of subsequent layers.
- Function of the Primer:The function of the primer is to bond the coating system to the substrate. The primer often provides corrosion protection for a steel substrate by using one or more methods of barrier, inhibitive orgalvanic protection. The primer must also be tolerant of the level of surface preparation performed and must be compatible with the next layer applied. If the primer is the sole layer present in the coating system, as in a single-coat system, it must also be resistant to theservice environment. (Further reading:Defining Service Requirements & Environmental Factors for Coating Specification.) When additional coats are applied, the primer typically has low gloss to promote the adhesion of additional coats.
- Function of the Intermediate Coat:一个n intermediate coat is typically incorporated into a coating system for the purpose of addingbarrier protection.The intermediate coat must be compatible with both the primer and the top coat. Like the primer, the intermediate coat usually has lower gloss to promote the adhesion of the top coat.
- Function of the Top Coat:The top coat or finish coat is the first line of defense in a corrosion-protection system. It must also be aesthetically compatible with the specifier’s priorities and will often be required to maintain color and gloss levels for long periods of time. Naturally, the top coat must be resistant to the service environment and must be compatible with the underlying layer (primer or intermediate coat, as appropriate). In addition, the top coat must be able to accept amaintenance overcoat.
一个s mentioned previously, each coating layer has a function that is performed at a given thickness. When applying coating materials, thevolume solidsor nonvolatile matter—expressed as a percent of the liquid paint—is an important factor in determining the film thickness. Often, coating manufacturers provide either a targetwet film thicknessor targetdry film thicknessin the literature associated with each coating product. Many times, only one of the target film thicknesses is provided. In these instances, calculations employing the volume solids of the coating, and either the target dry film thickness or the target wet film thickness, can be performed to determine the wet or dry film thickness that has not been specified.
***
完整的战争h article along with the rest of the authoritative, reliable sources of information, visit the Handbook 5B webpagehere.